Valves & Fittings

CAST STEEL GLOBE/GATE/CHECK VALVES as per ND-16/40 and ASA-150/300 with or without I.B.R. Certificate in Form III C
Size range: 1/2"to 16"

FORGED STEEL GLOBE/GATE/CHECK VALVES with SS Working Parts, Socket/Screwed & Flanged ends and suitable for 750° F (450°C)
Size range: 1/2" to 2"

S. S. 304/316 Alloy 20 GATE/GLOBE/CHECK/SAFETY/BALL VALVES

CAST IRON GLOBE/GATE/CHECK VAVLES
Size range: 2" to 56"

CAST IRON FOOT VALVES as per IS/BSS
Size range: 2" to 36"

CAST IRON PULP VALVES Kirloskar Type
Size range: 2" to 24"

BUTTERFLY VALVES, Wafer Type / Flanged Type as per ISS / AWWA / BSS
Size range: 1" to 24"

BALL VALVES Single Piece/Two piece/Three piece Design
Size range: 1/2" to 6"

FLUSH BUTTOM VALVES C. I. or S. S. Body
Size range: 1" to 3"

PINCH VALVES, C. I. Aluminium or M. S. Body
Size range: 1" to 6"

C. I. SPRING LOADED RELIEF VALVES AS PER G & K CAT FIG. H-20 and H-19
Size range: 1" to 16"

C. I.AUDCO TYPE (SELF LUB) TAPER PLUG VALVE Audco Fig. MW11-MW-12 Screwed & Flanged end
Size range: ½” to 12"

C. I. SLUICE VALVES As per I. S. 780 with or without ISI Mark
Size range: 2" to 36"

DIAPHRAGM VALVES Lead Lined, Rubber Lined, Neoprene Lined, Glass Lined Teflon Lined, Fibre Glass Lined
Size range: ½” to 12"

CAST IRON PISTON PILOT OPERATED PRESSURE REDUCING VALVES
Size range: 1" to 4"

CAST IRON INVERTED BUCKET TYPE STEAM TRAPS
Size range: ½”to 2"

CAST IRON SINGLE & DOUBLE ACTING AIR VALVES as per G & K Cat Fig. H-4, H-7, H-40, H-40-K
Size range: 1/2" to 12"

STEAM TRAP TD-2 TYPE made out of S. Steel 13%, Screwed end BSP
Size range: 1/2" to 12"

GUN-METAL STEAM STOP VALVES & PRESSURE REDUCING VALVES
Size range: 1/2” to 2"

GAUGE GLASS COCKS GM, CI, SS, BRONZE Screwed / Flanged
Size range: ½” to 1"

SIGHT GLASS (Single & Double Window) GM, CI or SS

C.I. / STAINLESS STEEL / GUN METAL Y TYPE STRAINERS with Brass or S/Steel Mesh Sc. & Fl end
Size range: 1/2" to 16"

GUN METAL GATE, GLOBE, SAFETY, PLUG, CHECK VALVES

STAINLESS STEEL VALVES FROM S/S 304 CASTING
  1. Gate Valves
  2. Globe Valves
  3. Gland / Plug Cock
  4. Non-Return Valves
  5. Foot Valves

STAINLESS STEEL VALVES FROM SOLID BAR STOCK for High Pressure
  1. Globe / Gate Valve
  2. Non-Return Valves
  3. Needle Valve with Bakelite
Hand Wheel Test Pressure 1000 lbs.

BOILER SPARES & FTGS.
Header Caps, Gaskets, Fusible Plugs, Hand hole Caps Boiler, Boiler tube cutter.

TEE, BENDS, ELBOW, REDUCER, FLANGES, BOILER PIPES all with IBR T. C

PNEUMATIC CONTROL VALVES, Single & Double Seated.

ELECTRICALLY ACTUATOR OPERATED VALVES
Gate, Globe & Butterfly Valves.

STRAINERS, “Y” Type, Basket Type, Duplex Type & Pot Strainers.

SOLENOID VALVES, CYLINDER VALVES.